Source code for pyro.compressible_fv4.problems.kh

"""A Kelvin-Helmholtz shear problem.  There are 2 shear layers, with the and an optional
vertical bulk velocity.  This can be used to test the numerical dissipation in the solver.
This setup is based on McNally et al. 2012."""

import numpy as np

from pyro.util import msg

DEFAULT_INPUTS = "inputs.kh"

PROBLEM_PARAMS = {"kh.rho_1": 1.0,
                  "kh.u_1": -1.0,
                  "kh.rho_2": 2.0,
                  "kh.u_2": 1.0,
                  "kh.bulk_velocity": 0.0}




def init_data(my_data, rp):
    """ initialize the Kelvin-Helmholtz problem """

    if rp.get_param("driver.verbose"):
        msg.bold("initializing the Kelvin-Helmholtz problem...")

    # get the density, momenta, and energy as separate variables
    dens = my_data.get_var("density")
    xmom = my_data.get_var("x-momentum")
    ymom = my_data.get_var("y-momentum")
    ener = my_data.get_var("energy")

    # initialize the components, remember, that ener here is rho*eint
    # + 0.5*rho*v**2, where eint is the specific internal energy
    # (erg/g)
    dens[:, :] = 1.0
    xmom[:, :] = 0.0
    ymom[:, :] = 0.0

    rho_1 = rp.get_param("kh.rho_1")
    u_1 = rp.get_param("kh.u_1")
    rho_2 = rp.get_param("kh.rho_2")
    u_2 = rp.get_param("kh.u_2")
    bulk_velocity = rp.get_param("kh.bulk_velocity")

    gamma = rp.get_param("eos.gamma")

    myg = my_data.grid

    dy = 0.025
    w0 = 0.01
    vm = 0.5*(u_1 - u_2)
    rhom = 0.5*(rho_1 - rho_2)

    idx1 = myg.y2d < 0.25
    idx2 = np.logical_and(myg.y2d >= 0.25, myg.y2d < 0.5)
    idx3 = np.logical_and(myg.y2d >= 0.5, myg.y2d < 0.75)
    idx4 = myg.y2d >= 0.75

    # we will initialize momemum as velocity for now

    # lower quarter
    dens[idx1] = rho_1 - rhom*np.exp((myg.y2d[idx1] - 0.25)/dy)
    xmom[idx1] = u_1 - vm*np.exp((myg.y2d[idx1] - 0.25)/dy)

    # second quarter
    dens[idx2] = rho_2 + rhom*np.exp((0.25 - myg.y2d[idx2])/dy)
    xmom[idx2] = u_2 + vm*np.exp((0.25 - myg.y2d[idx2])/dy)

    # third quarter
    dens[idx3] = rho_2 + rhom*np.exp((myg.y2d[idx3] - 0.75)/dy)
    xmom[idx3] = u_2 + vm*np.exp((myg.y2d[idx3] - 0.75)/dy)

    # fourth quarter
    dens[idx4] = rho_1 - rhom*np.exp((0.75 - myg.y2d[idx4])/dy)
    xmom[idx4] = u_1 - vm*np.exp((0.75 - myg.y2d[idx4])/dy)

    xmom[:, :] *= dens
    ymom[:, :] = dens * (bulk_velocity + w0 * np.sin(4*np.pi*myg.x2d))

    p = 2.5
    ener[:, :] = p/(gamma - 1.0) + 0.5*(xmom[:, :]**2 + ymom[:, :]**2)/dens[:, :]





def finalize():
    """ print out any information to the user at the end of the run """